7 Problems and its solution for Interlocking paver blocks in India

paver blocks in india

 

JR Rubber Industries are the leading producers of rubber paver blocks in india and spread their name in Africa for pavement and tile production, The company with 25 years of success is the prime choice for interlocking paver mould creation and paver plant installations along with onsite or online trainings

Along with paver productions support, we also care for the maintenance of the pavers and here are some of the tips that will help to take care of concrete pavers and its regularly reported issues.

We often see that pavers at footpath, compounds and even at home surrounding that many pavers are either broken or uneven. It often causes some disturbance to many passengers or ourselves when we walk over or near to it. However, We often neglect it because this issue might not under us to solve or we don’t know what to do. Hence, we are providing you with the solution to a few problems that usually occur during the lifespan of pavers. These solutions can be used at your paver filled compounds.

Here are the problems and solutions for the paver issues.

rubber paver mould manufacturers

  1. Uneven size and height of pavers

We often find uneven pavers at public places which is not so comfortable to walk by. However, the reason behind this problem in the base itself. The base may not be filled properly or the mixer had an uneven thickness. If the site has clay soil, then it will hold a lot of water than soil.

The existence of more water in the soil will make way to displace the original position of pavers. During the winter time when the ground freeze, the soil will expand more and push the paver up. However, when the soil comes back to normal position, The pavers may stay at the same high since they cannot move down without a good amount of force from the other side.

Solution: Unfortunately, we cannot fix it easily. Hence, we will have to redo the paver installation by clearing the stone dust under the paver.

  1. Stone Dust issue causing uneven Paver Height

It often observes that most paver production unit use stone dust for the base preparation as a setting bed. Stone dust is a screening by-product that used for having some gravel pits. However, the main problem with stone dust is that it breaks into fine dust form when its installed under the paver. This dust holds a lot of water and can form a clay soil when it freezes.

Solution: The ideal way to make composite to have even compaction is by using ¾ processed gravel that has various size particles. However, there is no way to repair the existing uneven paver other than starting over the whole process.

  1. The Paver and Fixed edges are slowing disappears

You would have noticed that many pavers don’t have the correct edge and those are on the edge of breaking since no setting bed is available under the pavers.

Solution: A filter fabric usage under the base and bringing up the sides of project excavator will prevent this issue. Unlike the uneven paver heights, this issue can be fixed by the particular area without completely starting over. Filter fabric can be fixed for each paver and new base can be added for paver reinstallment.

  1. Paver Land is Settled

The main reason for a settled paver land is lack of compaction. This phenomena is often seen on a nearby site where house or pools are constructed. The backfilled soil are mostly not contacted when they filled. It is common that the ground under the paver dug up and not filled properly.

Solution: We are do following for fixing this issue.

  • Pull up the paver
  • Add more gravel base
  • Make sure that it compacted in intervals
  • When the base is properly filled, level with bedding sand
  • Now reinstall the paver.

    plastic mould for paver tiles
  1. The edge pavers are about to fall off

The main reason for this issues is that no edge restraints are installed to keep the pattern together.

Solution: There are 2 type of edge restraints are available in the market for paver installation. The most used type in indian land is PVC edging restraints that used during paver installation. It spiked into the base of the gravel where paver is installed. For fixing this settled issue, paver need to take out, more sand and base need to be filled with proper compaction and at the end an edge restraint need to be installed in order to rectify paver settle issue.

  1. Water is puddling on the paver.

There could be 2 reason for this issue.

  • The base may not be built at a proper pitch and may have build at a slightly low spot.
  • The base was not compacted well and the land settled over the time.

Solution: The only way to fix this issue is to pull up the paver area that settled and add more base and grave to compact the land before reinstalling the pavers.

  1. Uneven pavers and tipping.

The reason for this issue is that pavers are not installed with joint sand and that resulted into a setting bed.

Solution: When pavers are completely laid, the concrete sand or polymeric sand is poured into all joints. Next to that vibratory plate compactor should run over the pavers. More sand is required to top off the joints and project is compacted 2 or 3 times.

So the next time you find an unorganized pavers in a public space, at home surrounding or at factories, you might able to know the reason behind it and can even figure out the solution to it.

pvc paver moulds

Why JR?

AS already mentioned, JR rubber Industries is a company that leading the production of paver and paver block machine in india & around the globe. We started our paver mould manufacturing units in a place called Thrissur, India. We provide the complete solution for flooring industry with the manufacture and supply of moulds, supply of paver machinery, setting chemicals and color oxides and complete technical assistance for paver production with in plant trainings and onsite support. We are your one stop destination for all your paver production needs.

  • Our products are made with 100% plastic raw materials
  • The smooth inner layer transfers all the intricate designs to the tile and paver blocks
  • We provide the best in class lifespan
  • We have setting chemicals pigment and acrylic polish for start-up units
  • innovative and creative designs
  • It is easy to de-mould, compared to other polypropylene plastic mould
  • We have machines for paver blocks and tile production for overseas customers
  • We are the most reliable technical service and consultancy

Our services

JR rubber

Paver moulds stand out in the industry with matchless lifespan, quality and performance. Our rubber moulds are widely used around many parts of the world for casting perfect

Rubber paver mould tiles. The outer layer of a mould is the identical material of automobile tyres. As the moulds do not have a strong and healthy application like tyres, the lifespan of moulds is almost boundless.

JR Polypropylene Plastic Moulds

JR polypropylene plastic moulds are created using virgin plastic material which has a longer lifespan than any other polypropylene moulds available in the industry which are made from the reusable plastic material. They always keep a shape and very less prone to breakage.

Machines

We source the perfect machinery for our customers from the best manufacturers. We provide a wide range of production line – mini paver plant, semi-mechanized paver plant, fully automatic paver plant which are suitable for all kind of production capacities. The key machinery being used for this is vibro table or otherwise known as vibrofoming tables.

 

 

 

<>paver blocks in india