3 Types of Paver Plants that JR Rubbers Offer

Automatic Paver Plant

Paver productions was too hard and time-consuming in its early years. Paver production workers used to do all the production process manually without any machinery help. However, as innovation progresses, machines started to replace a lot of work that man used to do. From automating some part of paver production, Engineers developed paver plants that can do the whole process of its own by one switch. Our Engineers at JR Rubbers produce 3 kinds of Paver plants for the client as per their requirement. Following are the 2 types of Paver plant that JR Rubbers build for the customer.

These paver plants are built at the client location as per the requirement from customer. Mini Paver plant is for the smaller paver producing companies who need comparatively lesser paver needs. This plant is automated in the different department, however, need several manual interventions during the paver production time.

Semi-Mechanized Paver Plant is the semi-automated plant which apt for a medium paver producing company. Semi Paver plant needs lesser manual interventions during the paver production process compared to mini paver plant. This plant can produce the much better unit of pavers as the specifications are higher than a mini plant.

rubber paver mould manufacturers

Fully Automatic Paver Plant is the most effective paver plant that produced by JR Rubbers. This paver plant does whole paver production process automatically and no manual intervention needed for continuing the workflow. Due to its extensive features, automatic paver plant produce the higher amount of paver compare to other 2 types of paver plants.

Below are the pavers that these plants are capable of building.

MINI PAVER PLANT

Mini Paver plant is a paver/tile production with  multitasking specifications. It is a high-performance paver plant with the capacity of performing large variety of tasks in the field. This plant has the capacity to build various level or pavers with a production capability of 3500-4000 moulds during the normal 8-hour shift.

Mini paver plant is basically for the small paver units. This plant needs manual intervention quite sometime during the paver production. Considering the low purchase cost, mini paver plant is famous among the upcoming paver business units.

paver mould making machine

Mini Paver Plant

This machine consist of

  • 2 VIBRO TABLE,
  • Approximately 3000 holes drilled on an 8MM plate,
  • 1.5 horsepower 3 phase motor
  • 8mm thick top plate
  • 3 working table with a machine dimension of 10 Ft length * 2.75 widths * 2.96 Ft height.
  • Machine length of 26 Ft and the file size of 2 Ft* 2Ft with height 100mm
  • Capacity of 3000 square feet per 8 hour shift for tiles with automatic movement of rubber moulds
  • 2000 square feet per 8 hour shift for Interlock paving Blocks

PAN MIXER FOR COLOR MIXING

  • A 150 km weighted Pan Mixer
  • Have a balancing capacity of 150kg batch with a volume of 200-litre capacity.
  • Having the strength of 3 horsepower electric motors with a bottom plate of 10mm and 8mm plate at the sideline.
  • This machine has a dimension of 32” dia*depth 16”
  • Reduction gearbox system with a ratio of 40:1

HYDRAULIC TYPE GREY MIXER MACHINE WITH HYDRAULIC HOPPER

  • 500 km Hydraulic Muller type Grey Mixer machine.
  • Concrete mixing machine with a capacity of 500 kg and 700-litre volume.
  • Feeder hopper with a capacity up to 400 litres
  • 7.5 HP and 750 KG and have a diamond of 55” Dia, 16” depth.

SEMI MECHANISED PAVER PLANT

Semi paver plant used for the production of paver or tile production. This machine can offer a high performance and can handle multiple tasks and it offer an option to produce different level of pavers pant with a capacity of 9000 to 10000 moulds/8 hour shift.

Semi Paver Plant is majorly required for medium sized paver units who can afford little better than mini paver plant. Semi paver plant is more powerful and efficient compared to its minor version.

automatic paving machine in kenya

                                                         Semi-Mechanised Paver Plant

This machine consist of

  • 2 VIBRO FORMING TABLE,
  • 3000 holes can drilled on an 8MM plate,
  • 1.5 horsepower 3 phase motor
  • 8mm thick top plate
  • 3 working table with a machine dimension of 10 Ft length * 2.75 widths * 2.96 Ft height.
  • Machine length of 26 Ft and the tile size of 2 Ft* 2Ft with height 100mm
  • A capacity of 3000 square feet per 8 hour shift for tiles with automatic movement of rubber
  • moulds and 2000 square feet per 8 hour shift for Interlock paving Blocks

PAN MIXER FOR COLOR MIXING consist of

  • A 150 km weighted Pan Mixer
  • Have a balancing capacity of 150kg batch with a volume of 200-litre capacity.
  • Having a power of 3 HP electric motors with a bottom plate of 10mm and 8mm plate at the sideline.
  • This machine has a dimension of 32” dia*depth 16”
  • Reduction gearbox system with a ratio of 40:1

HYDRAULIC TYPE GREY MIXER MACHINE WITH HYDRAULIC HOPPER

  • 500 km Hydraulic Muller type Grey Mixer machine.
  • Concrete mixing process with a capacity of 500 kg & 700-litre volume.
  • Feeder hopper with a capacity up to 400 litres.
  • 7.5 HP and 750 KG and have a diamond of 55” Dia, 16” depth.

paver mould making machine
FULLY AUTOMATIC MACHINE

The fully automatic machine is an ultimate for business as it reduces manpower requirement and increases the efficiency by producing 25000 wet cast paver/day. Its automatic paver creation will refrain the duplication and waste of material handling which confirms the correct use of resources. This automatic paver plant introduced for the first time in the world by the most renowned manufacturer in India.

Fully automatic paver plant is the best paver producing plant JR Rubber produced as of now. This plant doesn’t require manual intervention and can produce the highest rate of pavers within a daytime. This is basically intended for the bigger paver manufacturing units.

Here are a few features of the fully automatic plant.

Vibrating Tables

JR rubbers being one of the best paver making company in the world is celebrating their silver jubilee in paver making field. Even after 25 years of experience, JR is standing on top and high in the paver manufacturing field. We have Mini, Semi, Fully automatic paver plant that offers an option to build different level of moulds with high quality and durability. All the moulds we created with utmost quality and have a guaranteed lifespan of 12 – 15 years. Here are some major points on why to choose JR for paver production.

  • The appearance of a non-static and anti-static inner layer
  • JR Rubbers deliver the finest quality of products in paver
  • There is no Paver shape deformation
  • There is no requirement to wash the molds, still, it will keep the shape.
  • Strength and durability are similar to automobile tyres
  • JR Products are made with 100% virgin raw materials
  • We provide innovative and creative designs for products with long lasting durability.

<>Automatic Paver Plant

Complete Process Overview of Paver Productions

 

paver productions

Remember the old days when we used to play on the soil in front or at the backyard of our house? Things are changed for good and all houses and industries started applying pavers in their ground spaces. This helps to provide more beautiful and clean surrounding as well as restricting insects entering the home or factory premises.

Ever wonder how these pavers are made?

Ever give a thought of the existence of paver productions plant?

Probably your answer is NO unless you are working in the paver manufacturing company. Here we are going to brief you about JR Rubber Mould paver manufacturing process. Before we begin, let’s give you some information about our JR Rubber mould company.

JR Rubber Moulds is one of the leading paver producing company with an enormous experience of 25 successful years. By establishing the client base in 29 countries across the globe. We have started our journey by opening our first branch in Kerala, India and spread our wings and expertise in India, South Asia and African countries. We have provides supports in

  • African Countries – Kenya, Tanzania, Uganda, Rwanda, Zambia, Somalia, Malawi, Niger, Nigeria
  • Asian Countries- Bahrain, Oman extending to Lebanon and in Southeast Asia – Vietnam
    rubber paver mould manufacturers

we are pioneered in paver manufacturing by gaining the status of the most trusted name in the paver producing industry. Our range of products include

Since we know a bit about the JR company, we can jump into the paver production process.

Paver Production Process

Paver production starts by segregating the pre-requisites and this process requires below resources.

  • 2 Vibrating table
  • Concrete Miller
  • Color Mixer
  • Baby chips
  • Crusher dust sand
  • Cement
  • Chemical
  • Colour Oxides
  • Power around 15 HP
  • Paver Moulds
  • Plywood Sheets

JR Rubber moulds is even capable of providing automatic paver plants which don’t need a manual intervention for paver production. However, we will be concentrating here on different stages of paver creation for a deep insight.

  1. Paver mixer and Color Mixer making

The first phase is to create the mixer for paver using the concrete miller. The mixer is created by mixing the cement with crusher dust sand, baby chips and water. The normal ratio of this mixer is Cement – 50 KG, crusher – 100 KG, Baby chips -84 KG and water as per requirement. All these ingredients should be mixed well to form the flowing mixer with the thick consistency.

On the other hand, color mixing machine can use for mixing the color using color oxides along with chemicals. Chemicals are used for water reduction in pavers in order to provide the ultimate strength. Whereas color oxides are used for coloring the paver along with drying out the paver for long durability. Here are few details about the chemical we are using.

  SMF-Sulphonated Melamine Formaldehyde

SMF powder and Color Oxides are used in the paver production. SMF is a well-known superplasticizer used in paver production around the world. It is a high-end water reducer in order to provide the maximum durability to pavers. SMF powder widely used for all types in all types of grouts, mortars, coating and as a component of the concrete admixtures and emulsions. The usage ratio is 2-4 gram per 1 kg.

PCE- Poly Carboxylated Either

PCE is also a plasticizer that performs a quick setting of mixer and water reduction. PCE is in liquid form with a quantity distributed drums. The usage ratio is 3-5 gram per 1 kg.

color oxide in algeria

 Color Oxides

Color oxides are used for used for coloring the tiles as per request and to make tile attractive. Color oxides also attached with the chemical which works as the plasticizer. The quantity of color requires only a little amount, that is 2 gram per 100 kg. There are re different types of oxides such as

1, Red Oxide
2, Black Oxide
3, Yellow Oxide
4, White Oxide
5, Grey Oxide

 Acrylic Resin

Color oxides are mainly used for providing the necessary colors to the tiles, it will make the paving designs more attractive. There is also chemicals added in it will which make the paver harder for improving the lifespan.

  1. Paver making

As the paver mixer prepared in concrete miller and color mixer and chemicals prepared parallelly, major paver production action can perform now. The process starts with layering the paver mould by color mix and place it on first vibrator table. The forward vibrating table will lead the paver mould to next table where the mould will be filled with paver mixer created in concrete miller. Again the paver will push to the vibrating table where the paver will fill its quantity in equal proportion.  After completing the table round, paver will be placed above the plywood sheet for one day to cool and harden the paver. The next day paver will take out and spread under the sun to soak the full water.

The above-mentioned process is the standard procedure used for paver production. However, JR Rubber Moulds went a step ahead and owning 2 types of plant that reduce the manual interventions in paver productions. These paver production plants are mentioned below.

 Mini Paver Plant

Mini Paver plant is paver/tile production which has multitasking specifications. It is a high-performance paver plant with the capacity of performing a large variety of task in the field. This plant has the capability to build various level or pavers with a production capability of 3500-4000 moulds within a normal 8-hour shift.

paver mould making machine

 Semi Mechanised Paver Plant

Semi paver plant used for the paver and tile production. This machine can offer high performance and can handle multiple tasks at one time and it provides an option to produce different level of pavers with a capacity of 9000 to 10000 moulds/8 hour shift.

 Fully Automatic Paver Machine.

The fully automatic machine is a lifesaver for business as it reduces the need of manpower and increases the efficiency by producing 25000 wet cast paver/day. This automatic paver creation will prevent the duplication and waste of material handling which assure the right use of resources. This plant introduced for the first time in the world and JR  is the most renowned machinery manufacturer in India.

JR rubber moulds having an experience of 25 years and proved to be one of the best paver making company in the world. Even after 25 years of experience, JR is standing on top and high in the paver creation field. We have Mini, Semi, Fully automatic paver plant that provides an option to build the different level of moulds with high quality and durability. All the moulds we created with utmost quality and have a guaranteed lifespan of 12 to 15 years. Here are some major points why to choose JR for paver production.

  • Appearance of a non-static and anti-static inner layer
  • JR Rubber moulds deliver the finest quality of products in paver production
  • There is no shape deformation
  • There is no requirement to wash the molds, still it will keep the paver shape.
  • Strength and durability similar to automobile tyres
  • JR Products are made with 100% virgin raw materials
  • We provide innovative and creative designs for products with long lasting durability.

 

<>paver productions

JR Rubber Paver Productions Plant in Odisha

paver productions

JR Moulds established our plants all over India by extending our support from our base location Kerala to Jammu and Kashmir. Having our client base all over India, we build a paver productions plant using JR rubber moulds at Bhubaneswar, Orissa. It was our immense pleasure to contribute our expertise in Bhubaneshwar through building a paver production plant for building paver via paver moulds, PVC paver moulds and plastic paver moulds.

Odisha is one of the 29th states in India which show a steady growth over time. To all those who are confused with the name Odisha, Odisha was formerly known as Orissa. Odisha is the 9th biggest state in India by area and 11th ranked state by population. The state has a 75% literacy rate which is higher than the average Indian literacy rate. Odiya speaking state is placed beside bay of Bengal to the east and shares its rest of the territory to West Bengal and Jharkhand to the north, Chhattisgarh to the west and Andhra Pradesh to the south. Odisha is filled with natural habitats and blessed with a long coastline. Odisha is also shown an impressive growth in domestic products and add to its credit Odisha’s capital city Bhubaneswar becomes the first city to consider for smart city project in India.

pvc paver moulds

JR Rubber Moulds initially started paver production company from Thrissur city in Kerala, India. Later on it spread its business to all over India by building the paver plants all around India. Add to our credit, we have established a powerful paver production plant in Bhubaneswar, Odisha. The plant is powerful enough to create paver from paver moulds, PVC paver moulds and Plastic Moulds.

To let you know more about our paver products, here are the detailed description of the following products.

Paver Moulds

Paver moulds are the structure that gave shape to pavers during the execution of paver production plant. Shapes can be differed as per the custom choice of the customer. However, there are more to paver moulds. We use different types of moulds due to the benefits it offers. We build following types of moulds

Rubber Paver Moulds

Rubber Moulds is the most flexible paver mould which can last upto 12-15 years on hard situation. As we are not using aggressive applications in paver creation. Pavers can last upto an infinite time.

rubber paver moulds

Here are a few features of Rubber mould

  • Rubber Moulds appears as non-static and has an anti-static inner layer.
  • We assure you a lifespan of 12 years to 15 years
  • As Rubber moulds does not involve in any aggressive application, the lifespan of mould could last infinite.
  • The vibration efficiently transferred to the concrete mix that it form optimum strength for the paver.
  • Rubber moulds is the best quality products in paver production.
  • Assurance of durability and strength.
  • Unlike plastic mould there is less deformation in shape.
  • Our rubber moulds provide higher lifespan than customer expectations.
  • Washing the rubber mould is not necessary as the appearance of the paver mould does not change on a normal condition.

    Plastic Paver Mould

Our Plastic paver moulds are 100% virgin raw materials of plastic which provide the best quality paver you could get. Plastic paver moulds are normally used for the outdoor floor use and it needs a better quality of plastic to have a longer lifespan in order to reduce the maintenance fare. Its smooth inner layer transform the designs to paver blocks and tiles. Plastic moulds offer the best lifespan among the paver moulds. Here are a few benefits of plastic Paver moulds service from JR rubber moulds.

  • 100% virgin plastic raw material used for making plastic paver moulds.
  • Build the longest lifespan pavers among different varieties of moulds.
  • Plastic paver mould Offers creative and innovative designs
  • Its flexible and easy to mold compare to other plastic moulds.
  • Machines provided for tile production/paver blocks for the overseas customer along with experienced trainers.
  • Along with machines, customer-specific training are provided directly at the client location.
  • We provide the most reliable technical service and consultancy

    plastic mould for paver tiles 

    PVC Paver Moulds

PVC paver mould is lighter than other moulds and offers good quality compared to other moulds. PVC paver mould is flexible enough to change its color at any point of time in its lifespan. This paver mould can also be used to imprint your desirable text on the pavers. PVC paver plant considered to be economic paver plant in nature.

Why JR?

JR Rubber Industries started their journey in 1993 and manufacture different moulds with a client base in India and 29 other countries all around the world. We are one of the prominent names in paver production and provides a complete solution for exterior flooring of industries. We are the premier supplier of pavers and paver production plant in African region which is a feather in our success journey. Supply of paver machinery, setting chemicals and color oxides and complete technical assistance for paver production with in-plant training and onsite assistance for production.

We are the one stop for your all paver production needs. Our variety of products includes Rubber Moulds for Pavers/Tiles/Kerbs/Cover Blocks Polypropylene Plastic Moulds Pavers and other customized products, paver production line – Mini paver plant, Semi-mechanized paver plant, Fully automatic paver plant. We have our client base in 29 countries such as Africa- Kenya, Tanzania, Uganda, Rwanda, Zambia, Somalia, Malawi, Niger, Nigeria, Bahrain, Riyadh, Oman, Jeddah regions. With an experience of all over the world for 25 years, we assure answer for all your paver related doubts.

Features of JR rubber moulds are listed below

  • We assure a lifespan to 12-15 years
  • The JR Rubbers moulds appear with a non-static and anti-static inner layer.
  • The lifespan is expected to indefinite as we do not use any aggressive applications
  • Unlike plastic mould, rubber moulds are more flexible in nature
  • We use the finest quality raw materials for paver production
  • The inner layers are made with special rubbers with the resistance of acid-alkaline.
  • Our rubber mould serves strength and durability similar to automobile tyres.
  • To ensure optimum strength for the paver the vibration of the vibrator is transferred efficiently to the concrete.
  • Rubber moulds retain its appearance, hence, no need to wash the moulds.
  • Unlike any other products, we fulfill more than the customer’s expectations. Our customer expected to last our pavers for 4-5 years. However, to their surprise, our pavers lasted for 10-12 years.
  • The outer layer of our rubber mould is flexible, strong, and resilient.
  • Our rubber mould specialty is that they possess high resistance to acid, alkali, corrosion, and effect of cement in any climate.

If you are searching for the best quality products for your pavement or searching for a good reliable paver production plant then JR Rubber Industries is the perfect answer for you. Visit our office or contact us for further information at JR Rubber Industries, Thadapparambu, Mulankunnathukavu P.O, Thrissur – 680 581, Kerala, India, or feel free to call us on +91 95622 82225. For more details about our products visit us at https://www.jrrubbermoulds.com

<>paver productions

A Pure Steer To Plastic Moulding

Pvc paver moulds

Do you know how to get it made a custom plastic part or product? This article will guide you to choose the right type of moulding process available today to help you to discover the real process for your project. It doesn’t matter how small or large, round, square, or weird shape, flexible or stiff, already mould or not?

What Is Plastic Moulding?

Moulding can also be spelled as molding. It is the process of manufacturing by shaping liquid using a rigid frame called a mold or matrix. A powder or liquid polymers such as polyethylene or polypropylene is placed into a hollow mold when moulding plastics for the polymer to take its shape. Various ranges of heat and pressure are used depending on the type of process used to create an end product.

plastic moulds for interlocking tiles

Does Plastic Moulding Possess Any History?

In the late 1800’s plastic moulding began to fill the need for plastic billiard balls. John Wesley Hyatt in 1868 invented a way to make billiard balls by injecting celluloid into a mould. To automate the process four years later Hyatt and his brother invented and patented the machine. Paver block machine in India, plastic moulding uses a basic plunger to inject plastic into a mould through a heated cylinder, the first plastic injection moulding machine in existence.

James Hendry, in 1946 invented the screw injection moulding machine. This replaced the plunger injection technique and it is a widely used method even today. In 1855 modern rotational moulding also has a rich history when rotation and heat were used to produce metal artillery shells in Britain.

In the early 1950’s plastics were introduced into the process when rotational moulding was first used to manufacture doll heads. The modern process of rotational moulding allows us to create large hallow containers with low-density polyethylene in the late 1960’s. Plastic powder developments, better equipment, process improvements have sped up the process of creating finished products and provide a path to the rapid growth of rotational moulding.

Which are the different types of plastic moulding?
Most popular techniques in plastic moulding are:
1, Rotational Moulding
2, Injection Moulding
3, Compression Moulding
4, Blow Moulding
5, Extrusion Moulding
6, Thermoforming

  • Rotational Moulds Are Highly Customizable And Cost Effective

    The moulds can be remarkably knotty to ease the moulding of a wide range of products. Pathway mold can incorporate curves, inserts, and contours as well as logos and slots for metal inserts or plastics to be placed after a product is moulded.

    Than injection moulds or bow moulds tooling costs are lower with rotational molds. The common uses for rotational moulding are:

1,  It is highly knotted to facilitate the moulding of a wide range of products.
2, To make large hollow plastic products like storage tanks, car parts, utility carts, pet houses, recycling bins, playground slides, road cones, kayak hulls, and marine buoys is what rotational moulding
3, It has lower start-up costs and runs as a cost-effective production when producing as few as 25 items at a time.

pvc paver moulds

  • Injection Moulding

    Making custom plastic parts by injecting molten plastic material at high pressure into a metal mould is the real process of injection moulding. After the molten plastic is injected into the mould, he mould is cooled and opened to reveal a solid plastic part just like other forms of plastic moulding. Paving block machine manufacturers in India suggests this process is somehow similar to Jello mould, which is filled then cooled to create the final product.

The common uses for injection moulding are:

1, Injection moulding is used for making very high volume custom plastic parts.
2, Large moulding machines can mold car parts.
3, Small machines can produce very precise plastic parts for surgical applications.
4, Plastic resins and additives increase the flexibility for engineers and designers.
5, PP mould is used in injection moulding for a wide range of applications.

As steel and aluminum are the raw materials for making an injection mould for spacers in Bahrain they carry a hefty cost. But, the cost per part is frugal if you need several thousand parts per year. Tooling with injection moulding usually takes 12-16 weeks with upto four more weeks for production.

    • Blow Moulding

      It is a method of making hollow, custom plastic parts, thin-walled. With a uniform wall thickness, it is primarily used for making products also where the shape is important. It resembles the same principle as glass blowing. Blow moulding machines inject air blowing up the hot plastic like a balloon and heat up plastic. As it expands the plastic blows into a mould and it presses against the walls of the mould taking its shape. The part is ejected when it is cooled and hardened after the plastic balloon fills the mould. An average of 12 hour day can produce around 1440 pieces because the whole process takes less than two minutes.

      The common uses for blow moulding are:
      1,  In most cases, it generates plastic drums, fuel tanks, and bottles.
      2, This is the best process if you need to make hundreds or thousands of bottles.
      3, It cost less than injection moulding.
      4, Blow moulding is fast and economical than injection moulding.
      5, Sometimes it is as high as 6 to 7 times as much as a roto-molding tool.

      plastic moulds for interlocking tiles

    • Compression Moulding

      It is done exactly as its name suggests. A heated mould is filled with a heated plastic material and then pressed into a specific shape. The heating process ensures that the plastic retains maximum strength once the plastic is compressed into the right shape. Wet cast tile moulds in China says cooling, trimming, and removing the plastic are the final steps involved in this process.

      The common uses of compression moulding are:
      1, Replacement of metal parts with plastic parts.
      2, Most commonly used for small parts and products in very high volume.
      3, This moulding type is used by the automation industry
      4, Its final products are very strong and durable.
      5, The opening cost of a compression mold is persistent.
      6, The cost of each individual part is low at high quantities.
      7, They are ideal moulding for large quantities of parts.

    • Extrusion Moulding

      Expect a long continuous shape extrusion moulding is similar to that of injection moulding. Another specialty is that in extrusion moulding,‘die’ is used instead of ‘mould’. By squeezing hot raw material through a custom die the extruded parts are made. To get the plastic resins into a mould for spacers in Nigeria, other forms of moulding use extrusion. This process ousts the melted plastic straight into a die. The shape of the final product is determined by the die shape.
      The common uses of the extrusion moulding process are:
      1, Extrusion parts have a fixed cross-sectional profile.
      2, They should retain the same along the length of the part.

  • Thermoforming

    Its manufacturing process is what a plastic sheet called thermoplastic is heated to a pliable forming temperature. Paver block production in Cambodia trimmed to create a usable product from its specific shape in a mould. It comes in varieties of colors, thickness, finishes, and materials.

In order to achieve the final product thermoforming uses several different types of moulds and processes. A single 3D form made out of aluminum is used to create 3D products. Moulds can be produced for a low cost using inexpensive materials, thermoforming uses low pressures.
The common purpose of thermoforming are:
1, Used to manufacture thin-gauge containers, lids, disposable cups, trays, blisters, clamshells, and other food and general retail industries.
2, Vehicle door and dash panels, refrigerator liners, and utility vehicle beds are the results of thick-gauge thermoforming.
3, To get a thermoform ready grass pavers mould in Malaysia takes an average  of 8 weeks and its cost is purely based upon the size of the part.

<>Pvc paver moulds