Do’s And Don’ts Of Paver Blocks Installation

 

paver block design

Paver block installation can be a real problem if you don’t know where or when to start the construction of your pavement. There are things that you must do to make your paver blocks strong like interlocking paver mould, which can provide you with a strong foundation and stability for your paver block design.

Then there are things that one must not do, the  “Don’ts” not to follow while installing a paver block, for example, one cannot use lightweight paver blocks for their parking tiles, as due to the constant heavy weight vehicles the lightweight pavers may break. One must use paver forms which are heavy and have good quality.

If one follows the Do’s and Don’ts pavement installation, one can make sure to have a strong and durable paver design, that can serve one for a long time. If you hope to have a strong paver block design make sure to follow the list below:-     

1)Don’t Cut the Corners

Mark all the pipelines, telephone lines and all other resources available under your paver block creation, make sure that you find the proper source and area for your pavement. Rather cutting the corners right where your paver block ends, take a bit more space and make sure to widen the cut.

For example, if your pavement in 10×20 do not cut the edges at 10 or 20, but add one inch more  and cut 11-21. By doing so you are provided with a better chance to have a well-finished paver block that can provide you with a better chance to have a large and ample paver pathway.
rubber paver moulds2)Requirement of the base material

You cannot assume the amount of cement, quantity of paver blocks and other materials would come in need. So don’t do the calculation of the number of paver blocks you may need, as if you buy them before you might have to make frequent visits to the shop to buy more or either you will have many paver blocks still left with you after the paver block is constructed.

A solution to this problem is buying pavers according to the work, for the start of the project have a minimum amount of paver blocks with you, when the project is half over or the minimum amount of the paver blocks get over, consult with your contractor and purchase the paver blocks needed.     

3)Use paver molds

Many people avoid using paver molds under their paver blocks as they feel it is of no use and has a very less benefit. Not using paver molds can result in a less durable paver block design a very fragile design that can dispatch or break any moment.

If you use paver molds you can easily avoid many problems in the future related to your paver blocks, in fact you can even provide yourself with a more durable and strong paver block design that can serve you for a long period of time. By using interlocking paver block molds you can also avoid problems like weed and grass growth on your paver block.

4)Take time

One can use their maximum time on the construction of the pavement, unlike any other flooring option pavement can be laid easily.

Other than all those points there are many more points to be considered while installing paver. Many are not aware of the work involved with the installation of block paving. These factors are not mentioned to scare anyone, but still, a little planning will go a long way. Unilock or interlocking paver blocks provides a brilliant technical assistance for the better installation of pavers. You can follow the do’s and don’ts mentioned below to avoid common mistakes.

paver mould india

PRE-INSTALLATION AND PLANNING

  • Do’s- Make a reasonable drawing of the area you intend to work with

A scale drawing is helpful than a computer-generated drawing. It is said so because pencil drawing will assist with the planning on the site and also it can help with the calculation of all the materials required. Find a space to incorporate a drainage plan in your plan because many think that water will percolate down through the paving stone joints but this is actually a great mistake. For the good tuning and selection of your product and design, a good plan will help with it.

  • Don’t – Guess at the area you want to cover

To make the area bigger and bigger is the most heard complaint ever. These words are not a compliment to sell more products but many people have the problem in visualizing their job and they fail to realize that once their yard is set. Rather than an effort a small amount of materials and work is the thing only needed to make your project bigger. Lay your garden hose out to represent the perimeter of the project.

  • Do – Plan the receiving of materials

Coordinating the delivery of new materials and removing the existing material is the next stage of planning. There will a number of materials you are dealing with and all of it can add with different materials that need to be kept separate. So you should keep a plan before things go as soon as they are delivered.

  • Don’t- Overestimate the amount of work you can get done

It’s better to do larger projects over a couple of weekends, one for removing existing materials and excavation and the other for paver making and base. Hiring a company is a better choice to save your time. Even though it costs, your works can be made easier and faster if it is done so.

BASE PREPARATION

  • Don’t- Cut corners

You have to decide the design and size of the job you start with the excavation. Mark all gas lines, phones lines and also over-excavate the perimeter of the area. For example, if your enclosure is set for 20✕10 feet then you should extends your base preparation past the finished size. Paver moulds are made in such a way that the base material extend past the paved edge an equal distance of the base depth.

  • Don’t- Guess at how much base material is required

Since there are no absolute rules to determine depth a few comments on the depth of the base materials is being necessary. Driveways and walkways requires different amount of quantity for laying base. Basically, to facilitate drainage clay bases need to be dug deeper.

  • Don’t-  Locale plastic under paving application

Seeds start from the top of the cracks and work their roots down in most cases. Usage of polymeric sand can prevent weeds to a great extent. Sometimes Pavement in Qatar place a granular base with geotextile base it will work as a mechanical barrier to stabilize and stop the clay from mixing with your good sub-base materials.

plastic moulds for interlocking tiles

  • Don’t-  Compact the bedding sand

Compacting the bending sand is the most common mistake. Loose sand given in between the pavers will allow them to set and also this kind of sand will allow the tamping process to even out the top surface of the pavers.

INSTALLING THE PAVERS

  • Do- Start laying the pavers on the longest straight wall

Poured in place curbs and foundation are rarely straight. There should be even a small gap seen after the completion of the project.

  • Don’t- Hammer the pavers together

Don’t lay the pavers tightly, it may raise issues in the future. Don’t measure the gap just set them beside one another. Its better to space the stones out rather than hammering them to straighten the face.

  • Do- Use edge restraint

In spite of their use, all projects need to be restrained properly to avoid creeping around the perimeter of the area. As edge restraint are flexible they can be used to tune your design.

Here, there are lots of do’s and don’ts mentioned but while installing products in its correct way can provide a long-lasting tremendous job that you can be proud with.

 

<>Paver Block Design



Why Rubber Paver Mould Tiles?

rubber paver mould tiles

We are familiar with rubber materials from an early age itself and know that it is a material which can be moulded into any desired shapes and remoulded. A popular and wide demand for rubber in modern age is for rubber paver moulds in india . In that case, rubber paver mould tiles are more important now. They are used in the primary areas of home, industry, hotel. School and many more places. It is broadly known as rubber paver moulding and rubber paver moulds

Rubber Flooring

brick making

Rubber flooring has created a new trend in the flooring field. Be it a full room floor covering or an entrance mat or a floor mat, doing it with rubber have many economic sides. One major fact is that mats made of rubber is weather resistant. Modern designs have taken its development from the technologies as well as the innovations. Floorings have been tested to resist just about any kind of substance. It get rid of us from a main headache while using other floor coverings. Many expensive flooring materials cannot be washed as it does in rubber flooring.

Tiles moulded with rubber

rubber block manufacturers

A thin, flat block or slab laid in rows to cover floors are called rubber paver mould tiles. Made of a rubber composition and resilient to the step, where marble floors are desirable, these rubber paver moulded tiles are used. It adds up its advantage as when used as a decorative flooring option.

These rubber mould tiles can be manufactured in any desired shapes and sizes. Since it is important to keep a standard measurement to discuss about these tiles, they have entitled the tiles with the measurements. It is furnished in mainly square, rectangle, triangle or some other special shapes and measurement taken in ‘inches’. The possibilities in pattern design and a multitude of colors, including a great variety of marbled types. One other advantage of this is, we can mould it into any shapes which are suitable for a specific structure or theme.

Properties of Rubber mould tiles

  • High level of softness.
  • Absorbing impacts.
  • It is resistant to various weather conditions and external phenomenons like fading, cigarette burns, fire crackers and damage.
  • The vulcanized surface of flooring ensures that it is virtually impossible to wear through.
  • This product is a total eco friendly product as rubber can be recycled
    pvc moulds for paver blocks
    Advantages
  • Slip Retardance and Safety:
    when other flooring options like wooden or normal tiles provide a clean and smooth surface, leaving chances of slipping off and getting scratched, rubber paver moulded tiles replaces it with the advantage of scratch proof and without slipping. This is especially helpful in the rainy season and in the area of restrooms.
  • Comfort and Noise Reduction:
    Giving more comfort for a walk and easy to stand and balance increasing the chance of liking the product more. While hard and smooth surfaces produce some noise, this is totally a muted version.
  • Maintenance:
    Matting requires less maintenance compared to most other hard surface flooring. This type of flooring is scratch resistant and can be cleaned by using any common inexpensive detergents and floor cleaners
  • Variety designs:
    A wide variety of design patterns are available. This include plain designs, checks and stripe patterns, abstract patterns and some that gives an outlook of granite, all available in different colours
  • Transit flooring:
    As the name indicates, it is the type used in various transportation uses like the one used in buses and trains.

Buying Tips

While choosing any rubber tiles, three factors to be considered are:

  • Durability
  • Shading
  • Water absorption

Check the rubber tile label for more information about the rating of the rubber

<>paver mould manufacturer



5 DIFFERENT TILES  IN A SINGLE MOULD

 

Rubber Moulding

Rubber moulds are mainly used for paving purposes done  inside and outside locations, which are designed in different shapes  with a non-stick inner layer. It has a high demanding strength and durability similar to automobile tyres. Automobile tyres are tyres which are mainly used in vehicles to provide grip for its wheel and ride along the ground with a perfect balancing. When we use rubber moulds it is easy to pave the tiles without any disruption in between the paving process. Because it ensures high quality outcomes with attractive appearance.

Rubber stone molds are mainly applied on front yard of homes, villas  and other buildings make it more attractive to the visitors.  Such a kind of molds most widely finding market across the world, with a perfect example of rubber paver blocks in Ethiopia, that  is found highly demanding among the customers. With the use of a rubber mould, we can produce different kind of tiles such as Paver tiles, Floor tiles, Wall tiles, Kerbstone and Cover blocks. The molds have  long lasting durability without any deformation or degradation in its  actual shape and quality.

paver block design

With the introduction of paver tiles as an inherited product from rubber molds, it has generated a high demand for the same. Paver tiles are produced in paver blocks that can be made in any shape in accordance with the customer demand.These tiles are manufactured using rubber molds and undertaking production  processes to give unique shapes, patterns and shades for the tiles.

Floor Tiles

While we get into the flooring section,  prefer Floor tiles to make it more attractive with a stunning outlook. Deciding the right floor tile is very important when decorating your homes. We can design our home with a luxurious outlook by using proper  Floor tiles that add elegance and sophistication to the overall ambience. Floor tiles can be produced in different colors by using chemical powders and color oxides and it can be any in accordance with our preference. With a perfect flooring of inner areas, will deliver an extraordinary look to the overall outlook that we expected earlier.  

concrete wall tile molds

An easy and super exclusive way to break the visual monotony of your kitchen, bathroom or living area is by using wall tiles which gives a refreshing and lustrous look to your walls by choosing any of the amazing Wall tiles from a huge collection. In the earliest era majority of the flooring desires is narrowed into a particular design or shape with common colors . When we compare it with the present rubber moulding facilities, conventional methods are now in very least demand. These trendy,attractively appearing and high quality tiles cater  all tastes and design aesthetics, which will help you to attain an upscale feel to your home, office and any other spaces which you wish to be more attractive. While we use different wall tiles with different shape and color combinations, it  helps us to acquire a distinct personality and pleasing mood for the designed spaces.

 

kerbstone

The other one is Kerbs or Kerbstone, which is much familiar with in our day to day life. Which specifies a boundary between the main travelling road and footpath areas. Kerbs are mainly categorized as in four types, namely :
1. Low or mountable kerbs
2.Semi-barrier type kerbs
3.Barrier-type kerbs
4.Submerged kerbs

From these we can choose any model for our paving requirements. It will help to reduce accidents by creating a gap between vehicles and the pedestrians. In the production process natural stones are mainly used for kerb construction by using traditional methods, but now more strengthened concrete materials and Rubber stone molds are used for production purposes.

cover block mould in qatar

Cover blocks act as  a bridge between the surface area and reinforcement bars to protect from natural calamities. Which also helps to prevent corrosion among them. Corrosion means the gradual destruction resulted in  materials through the chemical reaction with the environment, which is also known as Spacers used to provide spacing at slab, beam and foundation.

From the above information, I think you can analyze all the things regarded with rubber moulds and its inherited properties.     

<>Rubber Moulding